Review : Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A AC/DC with VolTect Non-Contact Voltage Detection
Best Reviews Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A AC/DC with VolTect Non-Contact Voltage Detection. Buy on the merchant 's on the web searching and browse reviews. If you're trying to locate Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A AC/DC with VolTect Non-Contact Voltage Detection with probably the most efficient worth. This could be the most successful deals to suit your needs. Where you may find these item is by on-line searching stores? Read the previews on Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A AC/DC with VolTect Non-Contact Voltage Detection Now, it 's best value. for that reason do not lose it.
Click to get Save Price Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A AC/DC with VolTect Non-Contact Voltage Detection
Main Features : Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A AC/DC with VolTect Non-Contact Voltage Detection
The Amprobe ACDC-400 TRMS digital clamp meter is a true RMS (root mean square) sensing, auto- or manual-ranging multimeter for measuring current, voltage, and resistance in electrical testing applications. It has a clamp that measures alternating current (AC) and direct current (DC) to 400 amp. The meter comes with detachable test leads that measure AC voltage and DC voltage to 600 volts (V), and resistance to 40 megaohms. The clamp has two jaws that can close around a conductor up to 1.1" (27 mm) in diameter to measure current or frequency without touching or interrupting the circuit. The relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing quick comparison of multiple readings. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in readings. It has a liquid crystal display (LCD) that shows readings both in digits and on a bar graph. The LCD is backlit for visibility in low light. An audible continuity sensor confirms that the circuit conducts electricity. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.
This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform, or non-linear loads, such as electronic devices or motors, where the current or voltage has a sinusoidal non-sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and automatically selects select the correct operating range for the property being measured. It can be switched to manual-ranging mode, which requires that the operator choose the appropriate operating range. The meter has a 4,000-count resolution, meaning it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V, which covers items used with enclosed building circuit installations (service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply). The unit comes with a soft vinyl carrying case.
Specifications
| Maximum alternating current (AC) input | 400 amp |
| Maximum direct current (DC) input | 400 amp |
| Maximum AC voltage input | 600 volts (V) |
| Maximum DC voltage input | 600V |
| Maximum resistance detected | 40 megaohms |
| Power supply | 1.5V NEDA 24G or IEC R03 AAA batteries (two, installed) |
| Standards met and certifications | European Normal (EN); International Electrotechnical Commission (IEC) and EN safety standard 61010-1; European Conformity (CE); Underwriters Laboratories (UL); Australia N10140 |
| Weight | 0.6 lb./254 g |
| Meter dimensions | 7.9 x 2.7 x 1.6 inches/202 x 708 x 40 mm (H x W x D) |
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Clamp meters (also called clamp-on meters) measure electrical current without cutting through wires or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. The meter's current clamp has two jaws that fit around a conductor to take measurements. All clamp meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages determine meter choice. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA.
What’s in the Box?
- ACDC-400 TRMS clamp multimeter
- (1) Test lead set
- (2) 1.5V AAA batteries (installed)
- Soft vinyl carrying case
- Instructions
Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A AC/DC with VolTect Non-Contact Voltage Detection Video Reviews
No comments:
Post a Comment