As a huge online store. You can take advantage of the Amprobe ACDC-100 1000A AC/DC Clamp Meter decent price and offers a quick and easy online purchasing process. In addition, we have safe and secure purchasing environment.
Product Name : Amprobe ACDC-100 1000A AC/DC Clamp Meter
The Amprobe ACDC-100 digital clamp meter is an average-sensing, auto- or manual-ranging multimeter for measuring current, voltage, capacitance, and resistance in electrical testing applications. It has a Hall effect clamp that measures alternating current (AC) to 800 amp and direct current (DC) to 1,000 amp. The meter comes with detachable test leads that measure DC voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, and resistance to 40 megaohms. The clamp has two jaws that can close around an electrical conductor up to 2" (50 mm) in diameter to measure current without touching or interrupting the circuit. The inrush reading displays measurement of entire motor inrush period at startup. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing for quick comparison of multiple readings. The maximum reading mode displays the highest reading in a session to track a sudden increase in measurements. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether a circuit’s diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. The backlit liquid crystal display (LCD) is visible in low light. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter has an impact- and wear-resistant molded rubber body with a probe holder. A finger guard on the body of the meter helps protect fingers from shock.
This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and will automatically select the correct operating range for the property being measured. It can be switched to manual-ranging mode, which requires that the operator choose the appropriate operating range. The meter has a 4,000-count resolution, meaning it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V, which covers items used with enclosed building circuit installations (service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply). The unit comes with a soft vinyl carrying case with built-in probe storage.
Specifications
| Maximum alternating current (AC) input | 800 amp |
| Maximum direct current (DC) input | 1,000 amp |
| Maximum AC voltage input | 600 volts (V) |
| Maximum DC voltage input | 600V |
| Maximum resistance detected | 40 megaohms |
| Maximum capacitance detected | 3,000 microfarads |
| Power supply | 1.5V NEDA 24G, IEC R03, NEDA 24A, IEC LR03 AAA batteries (two, installed) |
| Standards met and certifications | European Normal (EN); International Electrotechnical Commission (IEC) and EN safety standard 61010-1; European Conformity (CE); Underwriters Laboratories (UL); and Australia N10140 |
| Weight | 0.6 lb./290 g |
| Meter dimensions | 1.6 x 3.1 x 1.6 inches/227 x 78 x 40 mm (H x W x D) |
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Clamp meters (also called clamp-on meters) measure electrical current without cutting through wires or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. The meter's current clamp has two jaws that fit around a conductor to take measurements. All clamp meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages determine meter choice. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA.
What’s in the Box?
- ACDC-100 average-sensing digital clamp multimeter
- Test lead set
- (2) 1.5V AAA batteries (installed)
- Vinyl carrying pouch with built-in probe storage
- Instructions
Click to get SavePrice Amprobe ACDC-100 1000A AC/DC Clamp Meter
Product Description : Amprobe ACDC-100 1000A AC/DC Clamp Meter
***Why don't we show the price?
Because our price may lower than the manufacturer suggested retail price, the manufacturer does not allow us to show you our price until you click to see price
You are seeking for Amprobe ACDC-100 1000A AC/DC Clamp Meter at cheaper price. No way!!!, here is the good place and trustable site. Let's decide to buy Amprobe ACDC-100 1000A AC/DC Clamp Meter with us and check our best service now!!!
No comments:
Post a Comment